Wi-Fi 5 and 6 GHz (Eco, w/demo file)
Mission to be used with Spectran V6 Eco
This is a very simple mission that sweeps 5GHz and 6GHz Wi-Fi by using the Spectran V6 Eco with the additional sweep license that extends it to 7.2GHz.
No hardware? No problem
Remove the Eco block and add the File Reader block, an example file can be downloaded here:
WLPC_2024_Aaronia_Mission - Dropbox
Ref.level is set to -30dBm (this will enable additional amps), lower it before usage.
The Mission
The mission is configured with a bin size of 258kHz with around 50% overlap giving you 16128 bins over the entire 2000MHz span. Added a File Writer block if you want to save it to disk.
As a reminder, you can download the profiles needed below.
📶ProfilesCustomize the mission
You can zoom into frequency of interest quite easy by using the scroll-weel on you mouse, or you can enable spectrum zoom by pressing this button on the right. This will enable the zoom menu over the spectra that you can make smaller and move around.
If you do not like the colors in the waterfal you can always change them by right-click the color pallete on the waterfal. Here you have all the color options you can dream off to customize it.
You can also add traces and customizes these as well by either right click on the spectra or from the block properties. In this mission I have added Clear/Write, Max Fall and Max Hold. These can be disabled, reset, removed from the spectra menu in the top left corner also.
Download the mission
A different variant of the same mission
This mission will sweep a bit slower, and will use the wrapped spectrum to two Combo Blocks.
Block Diagram
Block Diagram (file reader)
If you want to read the file, remove the hardware blocks and connect File Reader to Spectra1 on Wrapped Spectrum Block
Download a sweep file here:
Simply load this file inside the File Reader block as seen in the block diagram above.
Last updated
Was this helpful?